The cleaning of your firearm is vital for your safety, instrumental in ensuring that it is operating reliably and properly. Furthermore, cleaning your firearm can get messy if not correctly done with a suitable device. This is the main reason all firearm owners should consider purchasing a solvent trap cleaning kit.

Solvent traps have been known to be a handy cleaning tool for the firearm, as it helps improve safety, cleaning accuracy, and in allowing for the proper disposal and recycling of cleaning solvents. In addition, solvent traps are also known to be eco-friendly.

Solvents used for cleaning firearms are usually potent and poisonous, and can significantly pollute the environment. You can achieve all this by using a solvent trap that helps capture the cleaning solutions while preventing their damaging effects on the environment. Solvent traps allow you to contribute to a clean environment, and the device is environmentally safe when used as intended.

These environmentally friendly solvent traps help you do your part for the environment by allowing you to reuse, store and dispose of cleaning solvent properly, thus preventing it from polluting the environment. They provide the opportunity to preserve resources as well as save money. Throughout the cleaning process, you can also use different kinds of solvents such as CLP, lubing compound, and birthed cleaner.

High-quality solvent traps come can include dry storage cups which can be used a quick catch and dispose solution. This helps you dispose of used solvent quickly and replace it with another cup to quickly seal the tube with the end cap and clean a secondary firearm or run a cleaning sesh on your same firearm again. In addition to the solvent trap reducing the environmental impact of the chemical solvent disposal after cleaning your firearm, the cleaning solvent cannot stain your items of clothing, surrounding, and other property in your work space. Another significant benefit of solvent trap is that the cleaning solution is collected repeatedly, filtered, and reused. This is not only environmentally friendly, but it also allows you to save a lot of money.

A solvent trap is easy to use. Simply attach the end cap to one side of the tube and a thread protector to the other side. Then attach the side with the thread protector to your firearm. Solvents, lubricants and other cleaning chemicals will be trapped in the trap during the firearm cleaning process. This solvent trap will prevent the liquid from attacking your skin or messing up your floor. Be sure to follow all safety instructions on our product guides prior to using our products.

The installation process of the solvent trap adapter starts with fastening the end cap to one end of the tube.

Next, you take the thread protector and attach it to the opposite end of the tube.

Next, connect the solvent trap to the muzzle end of your firearm. Make sure the solvent trapping solution is secure to prevent leaks and enjoy the benefits of efficient and effective firearm cleaning. Be sure to review our product guides for our initial safety instructions.

When followed and during use, the solvent trap will have done its work removing any debris or dirt that might damage your firearm if left unattended. For removal, if you are using alot of solvent, then dont unthread the end cap first. You will want to unthread the tube from the thread adapter leaving the end cap secure. Then you may dispose or recycle of it properly and safely.

After which, you can wipe your firearm with a clean towel. The solvent trap would have already captured the cleaning solution, which you can then filter and reuse during your next firearm cleaning chores. Besides, you no longer have to deal with messy hands when cleaning your firearm.

Solvent traps have been around for quite a long time, and the current designs were created to make them more stylish, flexible, easy to use, and eco-friendly. Although an average solvent trap may prevent the cleaning solution from draining uncontrollably from your firearm, this is not enough from the best solvent trap. If you genuinely care about the environment, you need a solvent trap as a reliable cleaning solution to prevent future leakage and frequent replacement of the solvent trap.

The solvent trap should also come with a material that is light and easy to handle. So, the most important properties you should look for in a solvent trap are Good Corrosion Resistance, High Quality, and Lightweight. Suppose you can find all these features in a solvent trap. In that case, you can expect that the solution will provide the effect you want, prevent damage to your firearm, and block the potentially harmful cleaning solutions from making contact with your skin or the environment. Your firearm will also perform better with better care.

Don’t go to illegal websites if you are looking for the right place to buy a firearm solvent trap. While purchasing solvent traps from illegal sites may seem tempting due to their low prices, the fact is you can easily be fooled and end up buying a solvent trap that doesn’t show the desired quality and durability. Besides, you can end up purchasing a solvent trap that has been modified or altered into a device that is illegal in the United States. So, it would be best to look for a reliable company that supplies the best solvent traps at all times.

The whole point of purchasing a solvent trap is to preserve the health of your firearm as well as your skin and the environment. And only a reliable solvent trap vendor can ensure that you get the best possible products that will serve their primary purpose. If you are looking for a solvent trap with environmentally-friendly features, trusted solvent trap vendors such as Armory Den are your best bet. Also, the solvent trap kits offered by these companies are lightweight, durable, flexible, and cost-effective.

Summary

To maintain your firearm, it is essential to use the right tools that ensure your cleaning solution doesn’t harm you, your firearm, and the environment. In this regard, a solvent trap is a great choice; it helps protect the environment from chemical pollution and enables you to save money as well. However, it is essential to purchase from the right vendor and choose the suitable material for a solvent trap to ensure their quality.

Stainless steel solvent traps are often used in firearms to trap the firing residue, or “blowback,” created by high-pressure gas escaping from the muzzle of a gun. This material is then collected for examination during post-shooting cleaning processes. If you’re looking for an affordable and trustworthy option that will suit your needs, 304 stainless steel solvent traps offer configurable, adaptive, and anti-corrosion properties that make them worth considering.

You’re probably concerned about the unique nature and features of the 304 stainless steel solvent trap when shopping for one. The main areas of concern usually surround the solvent trap’s configuration, adaptive, and anti-corrosion aspects.

Price is always a factor in any purchase, but you want to get the most out of your money. 304 stainless steel solvent traps are available in configurations that allow them to easily fit different types and sizes of firearms. You can choose from a solvent trap that will fit your specific needs or one of our standard size traps.

When it comes to firearms, they are not always left in the same condition after use. The amount of residue and liquid left behind varies from firearm to firearm based on how much was used during cleaning, what solvents were used, and how often cleaned.

The good news about 304 stainless steel solvent traps is that they are interchangeable and can be used on any firearm you own. This means you might need to purchase a different solvent trap after every firearm you own or require one for each cleaning session. Of course, this can be pretty expensive when looking at the long-term cost of ownership over many years.

You may not care about the color of your solvent traps, but whether or not it is 304 stainless steel should matter to you because it provides several benefits over other metals that make them well worth the investment. Using one for each firearm could save money in the long run.

Buying a solvent trap that prevents corrosion of your firearm goes a long way in the durability of your firearm.

For example, the anti-corrosion properties of 304 stainless steel solvent traps prevent damage to your firearm from rust and corrosion. This not only protects the surface of your firearm but also helps it maintain its value over time without having any need for restoration or repainting down the road.

When buying a 304 stainless steel solvent trap, you can be sure that it will serve you for a long time without having to worry.

The 304 Stainless Steel Solvent Trap kit includes a 1/2×28″ and 5/8×24″ thread protector, one sealed end cap,  2.5″ tube extension, eight adaptive storage cups.

At Armory Den, only the best 304 stainless steel solvent traps are available for purchase. These solvent traps are made with the highest quality materials and come ready to use out of the box, so they can easily be installed or mounted on your firearm without any need for configuration. You can get yours today and raise your firearm cleaning standards.

7075 aluminum solvent traps are ideal alternatives for someone looking for quality and durability. These solvent trap kits effectively clean your firearm to ensure that it’s operating efficiently and you’re safe altogether. There are several 7075 aluminum solvent traps, but the best ones that draw more attention to buyers are those with a type III anodized military finish.

Billet 7075 aluminum solvent traps with a type III anodized military finish is a top selection among 7075 aluminum solvent traps. Also known as hard coat finishing, this type of finishing is meant to provide anti-corrosion properties to ensure that your solvent trap kit doesn’t rust. So what is it about this solvent trap kit that makes it an effective firearm cleaning solution?

Billet 7075 Aluminum Solvent Traps with A Type III Anodized Military Finish is among the most versatile alternatives in the market. It is made of high-grade materials, has a distinct modular structure and a hard coat finish. Some of the components of this solvent trap kit include;

1. Storage Cups – The kit has eight adaptive storage cups with a modular design. These cups are meant to collect the trapped solvent, and they are just enough if you decide to store the debris. However, you can choose to dispose of the solvent after trapping it.
2. End Cap – This kit has a sealed end cap with slightly sharp edges, and it is advised to exercises some extra care when handling it. The end cap is meant to lock and trap the solvent after being retrieved from the firearm.
3. Thread Protectors – Thread protectors are more of clips, and they are meant to hold onto the tube extension once it has been fitted on the firearm. Two thread protectors are included in the kit that measures (1/2×28″) and (5/8×24″), respectively.
4. Tube Extension – The tube extension is the largest and most significant part of the kit. Billet 7075 Aluminum Solvent Traps with A Type III Anodized Military Finish has a 2.5″ long solvent trap tube.
5. Adapter – The kit comes with a TPI adapter that measures from 1.375 “-24 TPI for males to 1.1875 “-24 for females.

• Configuration weight range (5.8 – 15.7 oz)
• Length range (2.5″ with end cap – 10″ when fully assembled)
• Material: aircraft/7075 billet aluminum
• Compatibility: industry-standard tube thread
• Diameter: 1.18”ID & 1.57”OD

It is advised to beware of some of the edges of Billet 7075 Aluminum Solvent Traps with A Type III Anodized Military Finish, especially the outer part of the end cap. This is because of the precision machining procedure used during manufacturing. Range gloves or non-latex/thick material are recommended during this solvent trap kit’s assembling and dismantling processes.

Armory Den offers Billet 7075 Aluminum Solvent Traps with A Type III Anodized Military Finish at a discounted price. You can either pay cash or pay in four installments through Afterpay. Some of the extra services that you will enjoy from your purchase include;

• Free and fast 3 – 5 days shipping
• 100% customer satisfaction
• 100% secure products

It is essential to understand how to use the solvent trap kit to avoid legal problems. The reason is that if you are a firearm owner, you want to avoid legal concerns by all means. One of the top-selling solvent traps is the 10″ Aluminum 1.75″ OD solvent trap kit. This has a total of 9 stainless steel cups. Can it be used for any firearm? If not, what are the specific firearm types that use this unique, special, and reliable solvent trap? We’ll find out more in this post.

A solvent trap kit helps in the routine cleaning of firearms. That way, users and owners can minimize risk and generally improve reliability, safety, and overall performance. The very best product is an all-inclusive solvent trap to make a complete kit. In this kit, you can find:

• Sealed end caps
• Thread protectors (in which case all kits include 1/2×28″ and 5/8×24″ except for the titanium type, which has 1/2×28″ or 5/8×24″)
• Pressed stainless steel storage cups, titanium/aluminum adaptive (AST) cups, or K cups
• Some distributors include 8-9 storage cups in their kits.

Solvent traps are used for routine cleaning of firearms to improve safety, reliability, accuracy, and performance. With a 10″ solvent trap, you can easily catch and dispose of the solvent produced during cleaning.

Also, you can protect yourself from harmful chemicals in the process of cleaning as long as the solvent trap is eco-friendly and allows you to recycle, store, and dispose of accordingly. A seller, supplier, or distributor of these solvent trap kits will ordinarily have a variety of durable designs and can offer a complete cleaning solution.

Customers most commonly purchase the 10″ due to the additional solvent collection area.

Having a mess during the cleaning of a firearm is inevitable. But with the solvent trap attached to the muzzle end, the cleaning fluid can easily pass down a tube. This highlights the importance of purchasing good quality and maintenance kits when it comes to owning a firearm.

Some firearms use a 10″ solvent trap. Because of its versatility, this size is used for different types of firearms. As a firearm owner, law enforcement official, safety instructor, government official, and enthusiast, you can choose the 10″ solvent trap if you have any of the following firearms:

• AR-10 308 (There are a lot of brands)
• AR-10 like AR-15s – Can be built with multiple brand parts
• AR-15 in 300 Blackout Caliber
• 6.5 Creedmoor – Long term precision rifles

With many firearm solvent traps in the market, you can choose a solvent trap that works for you and suits your firearm. Whatever the case, the bottom line is that it must give you a degree of hassle-free maintenance.

As a versatile accessory, the 10″ solvent trap kit can be used for different types of firearms. It applies because it is sturdy, long-lasting, durable, and reliable. The 10″ trap is an accessory that can be repurposed and allows for easy conversion. So, browse our Den today.

The entire 9” Aircraft 7075 Aircraft Aluminum Solvent Trap Tube Kit is built of 7075 Aluminum with thick walls for optimum durability. It’s easily one of the most durable available solvent traps on the market today. If you have had worries about dropping your solvent trap and sustaining any damage or reducing its efficiency, you should go for this model. You can easily use the 9” solvent trap for an extended period without any damage.

Remember that regularly cleaning your firearm helps to improve performance, safety, and reliability. Just like solvent traps of any size, the 9” solvent traps can be attached to the threaded muzzle of a firearm to capture the fluids used in cleaning your tool.

It has two threaded ends on both sides. The female threaded end allows you to attach the solvent trap to the male threaded end of the firearm’s barrel. Even though the firearm can vary in aesthetics or designs, they all have mechanical designs. You need to understand the mechanical design of your firearm and get the perfect fit for your tool.

o ensure you avoid buying a tool that would not work, compatibility matters a lot. The 9” solvent trap needs to match your firearm and every other firearm accessory you own. The only variable choice you get to make is the aesthetic design, which can only come after. Remember that the primary use of the solvent trap is to catch cleaning fluids from the barrel’s end while cleaning the bore and prevent creating a mess in your space.

For the AR-15 that comes with a standard threaded barrel, you can directly attach the 9” solvent trap with ease. But for other rifles without a threaded barrel, you may need to purchase an attachment in other to use the solvent traps.

The idea of the female end on the 9” solvent trap is to enable the device to have proper attachment and function properly.

The advantage of the 9” solvent trap length goes beyond just a longer-looking solvent trap. It also gives it enough room to contain more cups. For instance, the 9″ Aircraft 7075 Aluminum Solvent Trap can take eight Stainless Steel K Cups.

The increased number of cups would mean you have more space to hold solvent or store up Firearm cleaning patches, Matches and char paper, Prepper emergency storage, and medications like allergy or Nitro-glycerine pills.

The walls of the 9” solvent traps are thicker to increase the overall rigidity and durability. The length and strength of the 7075 aluminum have nothing on the weight of the tube. It’s solid but also lightweight.

The 9” solvent traps tubes are anodized in black color and are round-bodied to improve the aesthetics. It also comes with end cap threading to ensure its easy swapping.

A Solvent Trap is a firearm cleaning accessory that provides an easy way to recycle solvent, thus saving money and protecting the environment. Additionally, Solvent Trap Kits are easy to assemble and use. There are different solvent traps available on the market. In this post, we will show you the best materials used in creating 7″ Solvent traps.

Armory Den is a supporter of U.S. Veterans and First Responders. We bring firearm enthusiasts the absolute best in solvent trap cleaning solutions. Our solvent traps are configurable, adaptive, durable, lightweight, affordable, and constructed of high-grade materials.

Our Solvent Traps and parts are made in the USA with only the highest quality materials, such as:

• Titanium
• Aluminum
• Stainless Steel

Our designs are built to last and delivered fast! We offer high-grade Solvent Trap Tube Kits and a customizable line-up, such as our Adaptive Solvent Trap Kits. Our complete kits include thread protectors, tube extensions, end caps, and additional storage cups in the event of damage during transport. Here is a collection of some of our best 7″ Solvent Traps and materials used in creating them:

Material Used: Aluminum and Stainless Steel

The 7″ Aluminum 1.45″ O.D. Solvent Trap Kit includes 9 stainless steel cups, a sealed end cap, and both a 5/8 x 24″ and 1/2 x 28″ thread protector. This bestseller has a type III (hard-coat) anodized finish used for military application. The sealed end cap and thread protectors are made of 7075 Aircraft Aluminum, which helps reduce wear-and-tear on the threads and ensures effective on and off threading.

Many firearm users are looking for a firearm cleaning kit that is not too long, not too short, not too wide, and not too narrow. They also want it to have a perfect overall weight balance without letting them break the bank.

This versatile Solvent Trap Kit has a 1.45″ Outer Diameter and is 7 inches long, with a thread pitch of M34x1.35. The aluminum spacer locks everything into place for a flawless fit with absolutely zero rattling. Spacers are included with select solvent trap tubes to provide space to collect solvent (collection area) and help prevent damage during shipping and future transport. The spacer keeps the solvent trap parts snug inside the tube. Moreover, its aluminum thread protectors and sealed end caps are constructed of 7075 Aircraft Aluminum and Type III (hard coat) anodized for durability and strength.

Material Used: Titanium and Stainless Steel

The 7″ GR5 Titanium 1.45 OD” Solvent Trap Tube kit is constructed of Grade 5 Titanium, engineered to last for countless cleaning sessions. A popular model includes nine stainless steel storage cups, one sealed end cap, and either a 1/2×28 or 5/8×24 Grade-5 titanium thread protector. It’s a durable cleaning solution with the perfect weight balance.

The GR5 Titanium 1.45″ O.D. Solvent Trap Tube kit is a durable solution with anti-corrosive properties and made to last for countless firearm cleaning sessions. The thread pitch on this solvent trap tube is M34x1.25. The stainless steel spacer locks everything into place for a flawless fit. Additionally, the spacer collects solvent (collection area) to prevent damage upon shipping and future transport. The titanium thread protectors and sealed end caps are constructed with Grade 5 Titanium with a nice polished finish.

Material Used: Aluminum and Stainless Steel

The 7″ AD-EX Aircraft Aluminum Solvent Trap Kit is our upgraded D Cell Model to feature a 1.375-24″ Tube Thread Pitch, allowing for streamlined adaptability for firearms cleaning. This kit is constructed of 7075 Aircraft Aluminum and includes both a 1/2×28″ and 5/8×24″ Thread Protector, one sealed end cap (reducing wear-and-tear on threads), 9 stainless steel CNC storage cups, and a stainless steel spacer. In addition, this solvent trap kit has a Type III (hard-coat) Anodized finish used for military applications.

This solvent trap kit also includes a D Cell-Specific TPI adapter allowing users to adapt to aftermarket muzzles that simplify the connection and disconnection of the solvent trap for quick and streamlined cleaning. It is a D Cell model that is entirely constructed of 7075 Aircraft Aluminum and includes 9 Stainless Steel CNC Cups, both a 1/2×28″ and 5/8×24″ Thread Protector, and one Sealed End Cap. Additionally, this upgraded model was engineered as a D Cell to feature a more standardized tube thread pitch of 1.375-24″. This allows for streamlined adaptability for firearms cleaning.

Our company takes pride in offering the very best firearm cleaning products and all-inclusive solvent trap kits. Only at Armory Den can you get the best deals, responsive support, and a complete solution without having to purchase each item separately. So, browse our Den today.

Many people realize that the GR5 titanium is the best in the market. The following are some of the reasons consumers are turning to this design of solvent trap:

The Grade 5 titanium solvent trap boasts of 5-star customer reviews published on different reputable sites like Trust Pilot or Gun Broker. This reflects the ability of the manufacturer to give customers only the best solvent traps. Additionally, the company offers top-notch customer service.

Armory Den has one goal: to exceed all expectations of its customers. Unlike other customers that charge exorbitant prices for inferior products, Armory Den gives its customers the best solvent traps at affordable prices.

Based in the US, Armory Den is a wholesale supplier. The company has east coast and west coast facilities to satisfy customers from all parts of the country. It also prides itself in den deliveries and provides free shipping to customers and businesses, including wholesale partners.

According to the company, they consistently satisfy their deliveries even under challenging circumstances such as natural disasters. Both individuals and businesses should contact the company through their official website. There is a special wholesale solution form to submit for those who are willing to be wholesale partners and resell the products.

The company maintains a friendly customer service team to handle general inquiries. A representative from the company responds to every question in real-time.

Armory Den could be the right place to visit for firearm owners looking for the best solvent trap. With their Grade 5 titanium solvent trap, customers get value for money. Most importantly, the Grade 5 Titanium solvent trap kit is a favorite model for the following reasons:

• Titanium offers superior and superb properties as a material for solvent traps.
• The company designed the Grade 5 Titanium solvent trap with a surface that gets easily scratched or discolored with time.
• Titanium is easy to clean and doesn’t quickly get distorted
• Titanium has a gravity of 4.5. It’s generally lightweight, and this makes it portable while imposing less structural burden.

A solvent trap is a firearm cleaning solution. It has no hole for a projectile or a bullet to pass through. The idea behind a solvent trap is to collect the solvent during a firearm cleaning process. This helps users avoid spillage and allow them to recycle the cleaning material for future use.

The legal and mechanical purpose of a solvent trap is to catch the solvent during a cleaning process. A firearm that undergoes regular cleaning performs better, is safer, and is more reliable. Firearm owners must use solvent traps as intended. As their name suggests, they’re mainly meant to trap solvent. The Grade 5 Titanium solvent trap from Armory Den is 100% legal to purchase and own.

Buying unlawful solvent traps, or modifying the products for any other purpose, is against the law and can attract felony charges. Armory Den sells solvent traps that are intended for cleaning firearms and no other purpose. People looking to purchase solvent traps legally for a routine firearm cleaning should contact the company to place their orders through the official website.

Titanium solvent trap kits offer the best firearm cleaning solutions and allow firearm owners to get creative with their routine cleaning. Armory Den offers affordable but high-grade solvent trap solutions.

One of the company’s most popular products is the Grade 5 titanium solvent trap, which many firearm owners highly recommend.

So, browse our Den today.