10″ Aluminum 1.75″ OD Solvent Trap Tube (BLEMISHED)

$55.99

167 Points!

Please note, this is a blemished product. Blemished products are primarily those with cosmetic defects (finish/anodization nicks or scratches, slight finish/anodization blemishes or clouding, etc.). Mechanically, all of our blemished items are in working order. This blemished product is the same tube included in our complete 10″ Aluminum 1.75″ OD Solvent Trap Tube Kit

**Returns on these products are only on a case-by-case basis. Our customers are responsible for funding return labels on any blemished items.

Please see below for more details on this blemished item.

SKU: AD100003-1 Category:

2 in stock

Please note, this is a blemished product. Blemished products are primarily those with cosmetic defects (finish/anodization nicks or scratches, slight finish/anodization blemishes or clouding, etc.). Mechanically, all of our blemished items are in working order.

This blemished product is the same tube included in our complete 10″ Aluminum 1.75″ OD Solvent Trap Tube Kit.

The thread pitch on this solvent trap tube is M34 x 1.25. Therefore, you must use our thread mounts and end caps.

Additional information

PART

Solvent Trap Tubes

SPECIFICATIONS:

Weight: 8.3oz.
Length: 10 inches
Diameter: 1.75", 1.5'' ID
Tube Material: 6061-T6 Aluminum
Finish: Type III Hard Anodized
Tube Thickness: .25”
Cup Outer Diameter: 1.75”
Cup Inner Diameter: 1.5"
Tube Thread: M47x1.5"
Compatibility: Direct Thread Only!

PRODUCT INCLUDES:

(1) 6061-T6 Aluminum Tube

MATERIAL

T6 6061 Aluminum

INTERNAL THREAD

M47x1.5

ADDITIONAL INFORMATION:

A solvent trap is a firearm cleaning system that is designed to capture (or “trap”) cleaning solvent during the bore cleaning process, in order to transport and dispose of it efficiently, safely and in an environmentally friendly manner. Solvent traps attach to a firearms muzzle and feature cups, also referred to as dry storage cups, dividers, among other interchangeable names. Solvent traps are designed in a way that ensures a bullet may not pass through them.

The BATF defines a solvent trap as a “firearm cleaning accessory”, but to make certain that a solvent trap remains within the BATF’s “firearm cleaning accessory” definition, it should be clear that they are constructed to serve such a purpose.  Our solvent traps are designed and manufactured to serve one primary purpose, which is as a firearm cleaning system. We do not endorse, support or recommend using our solvent traps or solvent trap dry storage cups to silence, muffle or diminish the report of a firearm. Rather than selling our solvent trap tubes, dry storage cups and end caps separately, our solvent trap cleaning kits include all parts needed, and they are sold for cleaning purposes only. Modifying our products and/or using them for any other uses are not recommended or endorsed by Armory Den.

Solvent traps can be purchased legally without a Form 1. However, you cannot alter, modify, or redesign them into a device for muffling, silencing, or diminishing the report of a firearm without first, paying the NFA Mandated $200 Tax Stamp (if applicable) and receiving back an approved From 1 from the BATFE. Please be aware of the restrictions and regulations and those within the states you reside. Only after getting the approved Form 1 back can you make any modifications to the product. A crime is committed if you make the alterations before obtaining the tax stamp.

USER CLEANING MANUAL

10" Aluminum 1.75" OD Solvent Trap Tube (BLEMISHED)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

15% OFF CODE! DEN15